公共错误码

错误码 定义 状态描述 说明
0 MW_STATUS_SUCCESS Success 成功
1 MW_STATUS_PENDING Pending 操作挂起
2 MW_STATUS_TIMEOUT Timeout 操作超时
3 MW_STATUS_INTERRUPTED Interrupted 操作中断
4 MW_STATUS_TRY_AGAIN TryAgain 操作重试
5 MW_STATUS_NOT_IMPLEMENTED NotImplemented 未实施
6 MW_STATUS_UNKNOWN_ERROR UnknownError 未知错误
7 MW_STATUS_INVALID_ARG InvalidArgument 参数错误
8 MW_STATUS_NO_MEMORY OutOfmemory 内存不足
9 MW_STATUS_UNSUPPORTED Unsupported 未提供服务
10 MW_STATUS_FILE_BUSY FileBusy 文件系统繁忙
11 MW_STATUS_DEVICE_BUSY DeviceBusy 设备繁忙
12 MW_STATUS_DEVICE_LOST DeviceLost 设备丢失
13 MW_STATUS_IO_FAILED IOError IO 错误
14 MW_STATUS_READ_FAILED ReadError IO 读取失败
15 MW_STATUS_WRITE_FAILED WriteError IO 写入失败
16 MW_STATUS_NOT_EXIST NotExist 内容不存在
17 MW_STATUS_TOO_MANY TooMany 个数超限
18 MW_STATUS_TOO_LARGE TooLarge 大小超限
19 MW_STATUS_OVERFLOW Overflow 溢出(上)
20 MW_STATUS_UNDERFLOW Underflow 溢出(下)
21 MW_STATUS_FORMAT_ERROR FormatError 格式错误
22 MW_STATUS_FILE_EXISTS FileExists 文件已存在
23 MW_STATUS_FILE_TYPE_ERROR FileTypeError 文件类型错误
24 MW_STATUS_DEVICE_TYPE_ERROR DeviceTypeError 设备类型错误
25 MW_STATUS_IS_DIRECTORY IsDirectory 目录已存在
26 MW_STATUS_READ_ONLY ReadOnly 只读限制
27 MW_STATUS_RANGE_ERROR OutOfRange 区间错误
28 MW_STATUS_BROKEN_PIPE BrokenPipe PIPE异常
29 MW_STATUS_NO_SPACE NoSpace 空间不足
30 MW_STATUS_NOT_DIRECTORY NotDirectory 目录不存在
31 MW_STATUS_NOT_PERMITTED NotPermitted 不允许的操作
32 MW_STATUS_BAD_ADDRESS BadAddress 地址错误
33 MW_STATUS_SEEK_ERROR SeekError 跳转错误
34 MW_STATUS_CROSS_DEVICE_LINK CrossDeviceLink 跨设备链路错误
35 MW_STATUS_NOT_INITIALIED NotInitialized 未初始化
36 MW_STATUS_AUTH_FAILED AuthFailed 鉴权失败
37 MW_STATUS_NOT_LOGGED_IN NotLoggedIn 未登录
38 MW_STATUS_WRONG_STATE WrongState 状态错误
39 MW_STATUS_MISMATCH Mismatch 不匹配
40 MW_STATUS_VERIFY_FAILED VerifyFailed 验证失败
41 MW_STATUS_CONSTRAINT_VIOLATION ConstraintViolatin 违反约束
42 MW_STATUS_CANCELED Canceled 已取消
43 MW_STATUS_IN_PROGRESS InProgress 进行中
44 MW_STATUS_CONN_REFUSED ConnectionRefused 连接拒绝
45 MW_STATUS_CONN_RESET ConnectionReset 连接重置
46 MW_STATUS_ADDR_IN_USE AddressInUse 地址已占用
47 MW_STATUS_NO_RESPONSE NoResponse 无响应
48 MW_STATUS_INFO_CHANGED InfoChanged 内容变更
49 MW_STATUS_INVALID_DATA InvalidData 非法数据
50 MW_STATUS_NEED_MORE_DATA NeedMoreData 数据缺失
51 MW_STATUS_NO_BUFFER NoBuffer 缓存耗尽
52 MW_STATUS_BUFFER_TOO_SMALL BufferTooSmall 缓存过小
53 MW_STATUS_BUFFER_IS_EMPTY BufferIsEmpty 缓存为空
54 MW_STATUS_BUFFER_IS_FULL BufferIsFull 缓存已满

与“”相关结果约

    找不到与“”相关的结果